| ctrl+n | New Project | Start a new project. |
| ctrl+o | Open Project | Open an existing project. |
| ctrl+s | Save Project | Save the currently opened project. |
| ctrl+shift+s | Save As Project | Save the currently opened project into a different location. |
| ctrl+shift+enter | Add Folder | Add all images in the selected folder. |
| ctrl+enter | Add Images | Add one, more or all images. |
| ctrl+shift+p | Open Panels | Open all panels related to the currently selected items. |
| F1 | Help | Open this help. |
| F3 | Control Points | Add ground control points and matching image points. |
| F4 | Constraints | Define distance between control points. |
| F5 | Start | Create a complete 3D model. |
| shift+F5 | Abort Processing | Abort the currently running process. |
| F6 | Align Images | Calculate poses for all inputs. |
| ctrl+F6 | Draft Alignment | Quickly estimate poses for all inputs. |
| ctrl+F7 | Preview Reconstruction | Create a low detail 3D model very quickly. |
| F7 | Reconstruct Model | Create a 3D model in normal detail. |
| F8 | Color Model | Calculate a color for every triangle vertex. |
| F9 | Texture Model | Calculate a model texture. |
| F11 | Ortho Projection | Open the ortho projection tool/panel. |
| ctrl+a | Select all | Select all cameras or other objects. |
| ctrl+i | Invert selection | Deselect the current selection and at the same time select all objects which had not been selected. |
| ctrl+d | Clear selection | Deselect all objects. |
| ctrl+z, alt+backspace | Undo | Undo the last action. |
| ctrl+y | Redo | Revert the effects of the undo action. |
| ctrl+shift+~ | Screen recording | Start/stop a recording of a workflow in the application window. |
| ctrl+shift+F1/F2/F3/F4/F5 | Remember Image Selection | Remember up to 5 created image selections. |
| ctrl+shift+1/2/3/4/5 | Set Image Selection | Reuse previously remembered image selections. |
| ctrl+1 | Blue | Select the blue cursor in the active view. |
| ctrl+2 | Green | Select the green cursor in the active view. |
| ctrl+3 | Magenta | Select the magenta cursor in the active view. |
| ctrl+4 | Coral | Select the coral cursor in the active view. |
| hold space | Camera | Hold the space bar during any action to switch to a camera tool to move/pan/rotate/etc. the view camera. |
| shift | Add | Add all items starting from the last previously selected item to the current selection. |
| ctrl | Toggle | Add a new item into an existing selection or remove the item if it is already in the selection. |
| ctrl+shift | Remove | Remove one or more items from the current selection. |
| hold 1 | Make Blue | Hold 1 when clicking on an item to assign it to the blue cursor. Not every item can be assigned. |
| hold 2 | Make Green | Hold 2 when clicking on an item to assign it to the green cursor. Not every item can be assigned. |
| hold 3 | Make Magenta | Hold 3 when clicking on an item to assign it to the magenta cursor. Not every item can be assigned. |
| hold 4 | Make Coral | Hold 4 when clicking on an item to assign it to the coral cursor. Not every item can be assigned. |
| → | Next | Show next image. |
| ← | Previous | Show previous image. |
| Page Up | Previous by 20 | Show the previous twentieth image. |
| Page Down | Next by 20 | Show the next twentieth image. |
| SHIFT+ → | Next under component | Show the next image in the selected component. |
| SHIFT+ ← | Previous under component | Show the previous image in the selected component. |
| ↓ | Next under control point | Show the next image of the selected control point. |
| ↑ | Previous under control point | Show the previous image of the selected control point. |
| F | Frame Selection | Frame a view to the selected control points. |
| R | Reset View | Reset a view to its default state. |
| ctrl+C | Copy Filename to Clipboard | Copy the filename of a selected image to clipboard. |
| tab | Switch Layer | Switch between image layers, e.g. image and intensity images, textures or depth maps. |
| D/E | Disable / Enable | Disable/enable the selected image. |
| CTRL+Insert | Add to selection | Add the displayed images into the current selection. |
| CTRL+Delete | Remove from selection | Remove the displayed images from the current selection. |
| CTRL+7 | View Epipolar Geometry | Activates the ray-of-sight tool. |
| CTRL+6 | View Features | Show image features / tie points. |
| [ | Decrease | Deacrease the size of a brush when creating a shape on the ortho projection. |
| ] | Increase | Increase the size of a brush when creating a shape on the ortho projection. |
| F | Frame selection | Place the pivot in the middle of selection. If nothing is selected, zoom the camera to the pivot. |
| A | Frame all | Move the camera to see all. |
| C | Select camera by a lasso | Select cameras by the camera lasso tool. |
| shift+C | Select camera by a rectangle | Select cameras by the camera rect(angle) tool. |
| X | Find points from cameras | After camera selection, mark all sparse points seen by selected cameras. |
| D | Select points by a lasso | Applicable just to aligned models which have not been reconstructed yet. |
| shift+D | Select points by a rectangle | Applicable just to aligned models which have not been reconstructed yet. |
| S | Find cameras | Marks all cameras seeing selected sparse points. |
| E | Expand point selection | Expand your selection of 3D points visible by a set of cameras with all points seen by these cameras. |
| B | Create a clipping box | Restrict rendering to a box. |
| shift+B | Clear the clipping box | Remove the created clipping box. |
| ctrl+B | Edit the clipping box | Show and adjust the created clipping box. |
| ctrl+shift+U | Show the reconstruction region | Show and adjust the reconstruction region. |
| R | View reset | Reset the 3D view to its original position and rotation. |
| I | Component inspector | Activate the Inspect tool. |
| P | Center the pivot | Set the pivot in the middle of a selection. |
| shift+P | Clear the pivot | Completely remove the pivot from the scene. |
| escape | Exit an action. | Deactivate the current context widget (selection etc.) |
| ctrl+L | Lock camera pose(s) for alignment | Lock selected camera poses in a component. |
| ctrl+R | Disable an image | Disable/enable an image selected in the 3D view for further processing. |
| ctrl+E | Enable displaying cameras | Enable/disable displaying positions of cameras. |
| ctrl+H | Hide selected cameras | Hide selected cameras. |
| shift+H | Show selected cameras | Show hidden selected cameras. |
| ctrl+shift+H | Unhide all cameras | Unhide all previously hidden cameras. |
| enter | Set the camera view | Set the view camera to the pose of a camera selected by the cursor |
| 0 (numpad) | Set the 3D view to a perspective view | Show a perspective of a model. |
| 1 (numpad) | Set the 3D view to a parallel view | Show a parallel projection of a model. |
| 2 (numpad) | Set the 3D view to the top view | Show the top of a model. |
| 3 (numpad) | Set the 3D view to the bottom view | Show the bottom of a model. |
| 4, 5, 6, 7 (numpad) | Set the 3D view to a side view | Show side(s) of a model. |
| ctrl+C | Copy to Clipboard | Copy the content of the console to clipboard. |
| right-mouse button | Back/Cancel | Return to the previous step or cancel the tool. |
| hold shift+run the application | Reset settings | Reset the application settings to default. |